气动球阀-流白浆视频-气动蝶阀-刘玥av在线-电动蝶阀「厂家」-另类综合网-恒信流体控制有限公司

current location: Home   >> News >> Company news

Solenoid valve action and structural principle

Function and structure principle of solenoid valve:

I. applicability

The fluid in the pipeline must be the same as the calibrated medium in the selected solenoid valve series.

The temperature of the fluid must be less than the calibration temperature of the selected solenoid valve. Solenoid valve allows liquid viscosity generally below 20CST, greater than 20CST should be noted. When the working pressure difference and the z high pressure difference of the pipeline are less than 0.04mpa, such as ZS,2W,ZQDF,ZCM series iso-direct acting type and step by step direct acting type should be selected; When z low working pressure difference is more than 0.04mpa, pilot type (pressure difference type) solenoid valve can be selected; The z high working pressure difference should be less than the z big calibration pressure of the solenoid valve; General solenoid valve is one-way work, so pay attention to whether there is a back pressure difference, such as the installation of check valves.

Fluid cleanliness is not high should be installed in front of the solenoid valve filter, liquid gas solenoid valve on the medium requirements of cleanliness. Pay attention to flow aperture and nozzle diameter; Solenoid valve generally only switch two control; If possible, please install the bypass pipe for easy maintenance. When there is water hammer phenomenon to customize the solenoid valve opening and closing time adjustment. Note the influence of ambient temperature on the solenoid valve: the power supply current and consumed power should be selected according to the output capacity. The power supply voltage is generally allowed to be about ±10%.

Ii. Reliability

Solenoid valve is divided into normally closed and normally open two kinds; Normally closed type, power on, power off; But in the open for a long time to close very short to choose the normally open.

Life test, the factory generally belongs to the type test project, to be exact, there is no professional standard of solenoid valve in our country, so choose solenoid valve manufacturers carefully.

When the movement time is very short and the frequency is high, the direct movement type is generally selected and the fast series is used for large caliber.

Iii. Safety

General solenoid valve is not waterproof, when the condition is not allowed to choose waterproof, the factory can be customized. The z high calibration nominal pressure of the solenoid valve must exceed the z high pressure in the pipeline, otherwise the service life will be shortened or other unexpected circumstances. Corrosive liquid should be all stainless steel type, strongly corrosive fluid should be plastic king (SLF) solenoid valve. Explosive environment must choose the corresponding explosion-proof products.

Iv. Economy

There are a lot of solenoid valves can be used, but on the basis of the above three points should be used z economic products.

Structural principle of solenoid valve 

Direct acting solenoid valve

There are two types: normally closed and normally open. Normally closed mode is closed when the power is cut off. When the coil is energized, electromagnetic force is generated to make the moving iron core overcome the spring force and directly open the valve with the static iron core. When the coil power off, the electromagnetic force disappeared, the moving iron core under the action of spring force reset, directly close the valve mouth, media impenetrable. Simple structure, reliable operation, normal operation under zero pressure difference and micro vacuum. Normally open is just the opposite. Such as less than 6 flow diameter of the solenoid valve.

Step by step direct acting solenoid valve

The valve USES the primary valve and the secondary valve in one body, the main valve and the guide valve step by step so that the electromagnetic force and pressure difference directly open the main valve mouth. When energized coil, thus moving iron core and static iron core and electromagnetic force, pilot valve is located in the main valve and pilot valve mouth mouth open mouth, and the moving core and the main valve core together, at this time the main valve cavity pressure on the unloading, through the pilot valve port under the action of pressure difference and the electromagnetic force at the same time the main valve core upward movement, open the main valve medium circulation. When the coil is cut off, the electromagnetic force disappears. At this point, the moving iron core closes the guide valve hole under the action of dead weight and spring force. At this point, the medium enters into the upper chamber of the main valve core in the balance hole, increasing the pressure of the upper chamber. Reasonable structure, reliable operation and reliable operation at zero differential pressure. Such as: ZQDF, ZS, 2W, etc. 

Indirect pilot solenoid valve

The series of solenoid valve by the pilot valve and the main valve core connected to form a channel combination; Normally closed mode is closed when not energized. When the coil is energized, the magnetic force generated makes the moving iron core and the static iron core attract and close, the guide valve mouth opens, and the medium flows to the outlet. At this time, the pressure in the cavity of the main valve core decreases, which is lower than the pressure on the inlet side. The pressure difference is formed to overcome the spring resistance and move upward accordingly, so as to open the main valve mouth and circulate the medium. When the coil power off, the magnetic force disappeared, the moving iron core under the action of spring force reset to close the pilot mouth, at this time the medium from the balance hole into the main valve core, the pressure on the cavity increased, and under the action of spring force downward movement, close the main valve mouth. The normally open principle is just the opposite. Such as: SLA, DF (15 + caliber), ZCZ, etc.


主站蜘蛛池模板: 通道闸-人行通道闸|通道闸机系统厂家-深圳伊帕克智能科技有限公司 | 小程序开发,网站建设,APP开发,商城系统开发,社区团购系统开发,区块链溯源,互联网资质办理-软多信息技术有限公司_河南软多信息技术有限公司 | 搜药网-中药材中成药大全网普及中医中药功效归经知识,中药学知识天地 | 仪器校准_校验_计量检测_校正_检定严选博罗第三方法定计量所 | 菏泽代理公司|菏泽代办公司|菏泽公司注册|公司变更注销 | 室内儿童乐园定制_淘气堡订做_蹦床公园订制厂家-乐奇多 | 石家庄驾校之家_石家庄驾校哪个好_石家庄驾校报名-石家庄万晟网络驾驶资讯 | 网带输送机_皮带_滚筒_链板输送机_不锈钢输送链条生产厂家-宁津县鸿昶机械设备有限公司 | 上海眸社设计-上海专业的VI设计,宣传册设计,画册设计,折页设计公司 | 锯骨机-砍排机-全自动锯骨机-商用砍排机-切丁机 - 广州市九盈机械设备有限公司 | 检重秤,液化气充装秤,滚筒电子秤,汽车衡厂家|上海越衡实业 | 蜀山人才网_蜀山招聘网_求职找工作平台 | 途远VR+_成都VR全景制作_成都360全景漫游_成都720全景航拍_成都途远科技有限公司 | 上海钧尚电器有限公司 - Faulhaber电机 AMETEK pittman电机 AMETEK ROTRON军用航空风机 Exlar电动缸 MAE电机 MCG电机 CP电动工具 马头工具 AMCI驱动器 直流电机 减速箱 直流伺服电机,无刷电机,直线电机 直流防爆电机 防爆电机 汽车助力转向电机 EPS电机 faulhaber motor faulhaber gearbox NANOTEC电机 ELWOOD电机 PHYTRON电机 EXLAR伺服电动缸 高力矩、高性能直流电机,音圈电机,风机,直流风机,航空风机 | 无锡市一格机械设备有限公司【官网】 | 潍坊亿宏重工机械有限公司,破碎机,高性能立磨机,颚式破碎机,锤式破碎机反击式破碎机,重锤式破碎机,高性能反击式破碎机,圆锥式破碎机,给料机系列,链板给料机系列,简易给料机系列,振动给料机 | 亚克力游泳池_透明/空中/无边泳池_别墅亚克力泳池设计生产厂家_瑞地格乐-深圳他拍档 | 智慧园区平台_智慧园区智慧写字楼运营平台领导品牌 | 正规网上赚钱网站「百赚网」专注在家赚钱的网络赚钱平台 | 山东亮化工程_亮化公司_亮化资质-山东星汇照明工程有限公司 | 呼吸家官网|肺功能检测仪生产厂家|国产肺功能仪知名品牌|肺功能检测仪|肺功能测试仪|婴幼儿肺功能仪|弥散残气肺功能仪|肺功能测试系统|广州红象医疗科技有限公司|便携式肺功能仪|大肺功能仪|呼吸康复一体机|儿童肺功能仪|肺活量计|医用简易肺功能仪|呼吸康复系统|肺功能仪|弥散肺功能仪(大肺)|便携式肺功能检测仪|肺康复|呼吸肌力测定肺功能仪|肺功能测定仪|呼吸神经肌肉刺激仪|便携式肺功能 | 江苏圣博莱自动化科技有限公司| 室内门十大品牌-生态木门厂家-室内门厂家 - 浙江威威工贸有限公司 | 淮南网站制作丨淮南做网站丨淮南网络公司丨淮南哪家网络公司好丨淮南智讯网络 | 济宁三石工程机械有限公司-首页-小型起重机、环卫设备、小松配件 | 轴流风机_混流风机_排烟防火阀-德州辰特空调设备有限公司 | 找刑事辩护律师_找深圳刑事律师多少钱★王平聚【清华博士/刑法教授】 | 智能锁十大品牌_指纹锁_智能锁加盟_开换锁-锁当家【官网】 | 威学一百-专注国际学校择校备考-DSE-A-level-雅思-托福-OSSD-港澳台联考-AP-IGCSE-IB-AMC-多邻国-PTE-SAT-SSAT-小语种(如日语,韩语,德语,法语,西班牙语,意大利语,俄语,泰语)等考试培训,为出国留学学生提供个性化定制性学习方案,线下实体面授+线上网络课程, 提供一对一,小班课等多种班型 | 立式离心泵_不锈钢自吸泵_液下泵_变频无负压供水设备-大东海泵业无锡有限公司 | 江苏华海诚科新材料有限公司、连云港华海诚科新材料有限公司、连云港新材料 | 上海喷涂厂|上海喷漆厂|粉末喷涂|平湖喷涂厂|平湖喷漆厂-平湖华梦金属科技有限公司 | 潍坊亿宏重工机械有限公司,破碎机,高性能立磨机,颚式破碎机,锤式破碎机反击式破碎机,重锤式破碎机,高性能反击式破碎机,圆锥式破碎机,给料机系列,链板给料机系列,简易给料机系列,振动给料机 | 漫画大全免费看_漫画终身版_羞羞漫画网 | 砂基透水砖滤水率,防滑性试验仪,砂基透水砖落球冲击,抗冲击试验机-献县中正试验仪器销售处 | 重庆聚成达汽车有限公司-重庆吸污净化车| 烧腊培训,广东有实力的烧腊培训[免费试吃],广式烧鸭培训-烧鹅培训-学烧腊选广州嘉政 | 山东德曼医疗设备集团有限公司| 锌钢护栏,铁艺护栏,围墙护栏,锌钢围墙护栏,铁艺围墙护栏-互润金属丝网厂 | 深圳专利申请-深圳商标注册-深圳国高认定 - 深弘知识产权 | 卫生间隔断-东莞卫生间隔断-东莞卫生间隔断厂家-公共卫生间隔断-东莞市康丰家居建材有限公司 |